FreePDK45:ContactRules
From NCSU EDA Wiki
| Rule | Value | Description |
|---|---|---|
| CONTACT.1 | 65 nm | Minimum width of contact |
| CONTACT.2 | 75 nm | Minimum spacing of contact |
| CONTACT.3 | none | saveDerived: contact must be inside active or poly or metal1 |
| CONTACT.4 | 5 nm | Minimum enclosure of active around contact |
| CONTACT.5 | 5 nm | Minimum enclosure of poly around contact |
| CONTACT.6 | 35 nm | Minimum spacing of contact and gate |
| CONTACT.7 | 90 nm | Minimum spacing of contact and poly |
